.38 Special 5-Round Pocket Case
.38 Special 5-Round Pocket Case
3D
Published 2017-07-10T18:14:41+00:00
One of my friends requested a case for .38 Special rounds to keep in his pocket while hunting. This is what I came up with.
This is 5 parts total.
You may need to do some sanding to get the dovetail joints aligned, but it shouldn't require much.
I used super glue to secure the parts, but, without any sanding, everything was functioning without the super glue.
The clip may require some slight bending to get the case to close. I had one function perfectly off the printer, but the other one had to be gently pried back. I think it was just a printer cooling issue that caused some slight warping.
All objects **should** be oriented correctly for printing.
I used a 0.2 mm layer height since this item doesn't need to be pretty.
This piece doesn't require a lot of skill.
| 发表的日期 | 10/07/2017 |
| 让时间去下载 | - 152 分钟 |
| 材料数量 | 28 grams |
| 尺寸大小 | 69.1 mm x 43.9 mm x 67.9 mm (max bed dimensions) |
| 打印工艺 | FDM |
| 支持自定义 | YES |