Click Studs
Click Studs
Published 2014-11-26T13:00:20+00:00
Support free click-fit studs for customising clothing, jackets, leather punk / gothic pieces, cos play etc.
Using a click fit stud is an advantage in places where it is otherwise tricky to attach screw fit studs, and uncomfortble to use the push back pin style; e.g if your studding shoes.
Would be great to see where these studs end up being used, please send pics to eva@myminifactory.com or #mymyminifactory on twitter.
Recommended settings - Support off. .20mm layer height medium-high infill 8 mins per stud, 1g filament. I have also provided the gcodes for printing sets of 10 studs on makerbot rep 2 and ultimaker 2 - both with approx 1 hour print time and approx 10g of material.
发表的日期 | 26/11/2014 |
让时间去下载 | 10 - 60 分钟 |
材料数量 | 10g |
尺寸大小 | 10 x 10 x 16 |
打印工艺 | FDM |
复杂程度 | 容易 |
支持自定义 | YES |
I had to recreate the backing myself from scratch because the ones included felt too loose after printing. But it all worked out well and I am really pleased with the look. Thanks for uploading.