Aero L-39 Albatros aircraft scale model easy to print
Aero L-39 Albatros aircraft scale model easy to print
3D
Published 2017-04-18T11:03:09+00:00
Easy to print aircraft scale model, no supports needed (just patience).
The model is in 1/64 scale, It's very straightforward to assemble.
Happy printings, I really would appreciate your comments.
Greetings.
Print Settings
Printer:
Prusa i3 HIC
Rafts:
No
Supports:
No
Resolution:
0.15
Infill:
30%
Notes:
It an easy print, just make sure your bed leveled so you can have a really nice first layer.
Post-Printing
Making Grooves Depper
The model has a few grooves to provide details like cabin glass, ailerons etc. Using a sharp pointy object like a scriber make this grooves deeper so they don't disappear when sanding.
Sanding
Frist sand the model using 80 paper, just be patient. Then use a 240 paper, and later a 500 paper.
Glue
I have used super glue (cyanoacrylate) to put the model together, it work great on ABS.
Painting
I have used white acrylic paint on my models, about 5 or 6 layer. Again, just be patient and you will have an absolutely great looking model.
| 发表的日期 | 18/04/2017 |
| 让时间去下载 | - 460 分钟 |
| 材料数量 | 40 |
| 尺寸大小 | 150x150x60 |
| 支持自定义 | YES |