Bender with opening chest cabinet
Bender with opening chest cabinet
3D
Published 2017-04-26T15:34:09+00:00
This model of Bender has a chest door that can open and prints as a single piece. I thought it would be a cool design to use to test new filaments. In the images, you can see the model in Ninjaflex, glow in the dark, and magnetic iron filament.
I recommend printing the model laying down on its back. It can be printed vertically, but it makes it much more difficult to open the cabinet and remove the support material.
Depending on the print settings and material, it may be difficult to open the cabinet door. I found that running a box cutter around the door to disconnect the support material, and then carefully using the blade to pry open the door works well.
***I found that the magnetic iron filament, although awesome, was very brittle and the door separated from the hinge a bit when opening it.
| 发表的日期 | 26/04/2017 |
| 打印工艺 | FDM |
| 复杂程度 | 容易 |
