Black star
3,012
views
71
downloads
1
collection
0 comments
Loading comments...
Black star
3D
Published 2018-01-22T16:43:22+00:00
8
0
Add to Collection
Printing Details
To minimize the amount of support material needed, lay the object flat on the build plate and drop it half of its Z-height (-9.5mm at full scale) so that only half of the object is printed. Use support and brim and a small layer height such as 0.1mm. Do the same for the other half, or in this case just print the first half a second time since the object is symmetrical. Remove the support and brim on both parts, and glue the halves together.
Technical Information
发表的日期 | 22/01/2018 |
让时间去下载 | 72 - 80 分钟 |
材料数量 | 6g |
尺寸大小 | 19mm x 97mm x 96mm |
打印工艺 | FDM |
复杂程度 | 容易 |
More Information
Object Parts