CardBoard Robot - Fold Out Print In Place Robot!
CardBoard Robot - Fold Out Print In Place Robot!
Published 2018-07-01T13:57:15+00:00
This is the print in the place cardboard robot! All of the parts fold out from the main body, and it is completly print in place, with no supports required. It was modelled in fusion 360 and, in the photos, was printed with ColorFabb's Wood Filament. The arms also were stained using a dark oak wood stain. This model needs good cooling on the print (due to the mechanism in the arms) so I wouldn't recommend printing with abs, or other materials like it. As always thanks for printing and hope you enjoy :).
How to free up arms:
Take a flat headed screwdriver, and place it up the hole in the base of the print, making sure the flat sides are facing towards the sides.
Once in position, twist the screw driver until the arms come out and pull them the rest of the way
Other than that the print just needs good cooling, and no support. (supports may break the mechanism inside). The joints tolerances are good, so unless you printer has 0.8 nozzle you should print them just fine.
发表的日期 | 01/07/2018 |
支持自定义 | YES |