Loading
Star Wars Death Trooper
3D
Published 2017-04-12T08:58:13+00:00
Share 3D Post on Facebook
Printed on a DreamMaker Overlord pro using variable layer heights of. 12mm-.2mm. Hatchbox wood Pla used. White residue is left over from reducing layer lines using acetone an fine steel wool.
Minibot 120 3D Printer 50% scale 0.15mm layer 3h15 print time 23g white PLA
Printed with Hatchbox white PLA. Finished with acrylic paint. Thanks for a great design Paul!!!
Smoothed with acetone vapor
Printed on Sinterit LISA http://www.sinterit.com/
Thanks so much for this great mode. Here is a short video time lapse https://www.youtube.com/watch?v=RV5yIZgwNog&feature=youtu.be
printed in my D-Bot with ABS Glow in the dark
Thx!! Very great model
Beautiful!
Printed on tronxy p802ma at 60% scale. took 6 hours
This is an Awesome print,Paul done a great job The print is about 4 1/2 inches tall.
I really hope he does a full range of SW helmets in this style. I loved painting this one
Please do more SW helmets in this style. It's my favourite printed piece
One of the prints my kids loved. Amazing.
Without acetone treatment. Time printing: 1:20 hours scale: 23:6 x 24.9 x 22:9 mm / ~ 3 g filamment
That Monoprice could make this happen. Getting the support structure out of the space next to the skull was a pain in the butt, though.
Star Wars Death Trooper. Printed in MakerGeeks PLA with 0.1 layer height.
Absolutely love this model. Thanks, I have applied resin and plan to paint. (Quarter for size reference). printed on Monoprice maker select printer
Love it, aweasome model and my first time painting something with that kind of effects
Printed in ABS, smoothed and painted
Love this model! It printed beautifully, I had to paint it.
Spray painted
Death Trooper Print.
Painted with coffee and colored pencils
A quick print on our CR-10 500. 32hrs and 960 grams.
pla at .2
Layer height 0.15, 50mm/s
Printed it then painted it and final some 3d Coating
print on home made Itopie printer with recycled PS from OWA 0.2 LAYERS 3 HOURS print
Perfect christamass ornament
XXL print (25*25*25cm) and M print (10*10*10cm) in NYLON
nice model
Scaled to actual human size head, painting was very hard as I have no knowledge of that, but tried my best. PS: was actually printed with a Lulzbot Taz6 but I don't know why it's not in the list of printers.
Printed Great
Tevo little monster 0.6 nozzle 0.2 layer 0% infill - 8cm height
Printed on Wanhao D7
Tevo tarantula 0,1 mm layer
Impreso en una Monoprice Maker Select V2, baño de vapores de solvente y pintado con acrilicos, con aerografo y pincel
Decent print at .2mm layer height
Great model! Thanks for the awesome print! 0.1mm layer height printed in white with supports, then spray painted with Krylon auto primer/filler. Painted with acrylics then sealed with a lacquer spray paint.
0.1mm layer height printed in white with supports on a JG Aurora A3, then spray painted with Krylon auto primer/filler. Painted with acrylics then sealed with a lacquer spray paint.
I dig the details on this and it was a good model to try out some octolapse on my pi zero.
BEFORE AND AFTER...PAINTED BY JEREMIAH GRANT
Very nice dude, thank you very much for this model being free.
Finished it up with some xtc,primer and rub 'n buff.
MERCI 15 cm ..... print 34 hrs 0.1 ice filament WHITE
Awesome design
0.15 layer 0.15 infil supports from base
0.3mm no suports.
My first print
Düse 1mm layer 0.75 10cmhöhe
hey man i found this model on thingiverse and i wanted to trace it back to the original designer and i do believe that may well be you .. a lot of thingiverse models are remixed from other sources ..and i like to track those down and thank the designers for myself. so thank you for an absolutely amazing model!!! .. i did print it out on one my Anycubic i3 Mega's and would like to share a couple of pics with the original owner you ..thank you ;)
mexican deathmasks inspired :)
Cura, white pla, 205C 50mm/s 0.15mm
Thnx
Wonderful dsign.Thanks for sharing. More Printing Photos: https://mingshiuan.blogspot.com/2018/10/3d-star-wars-death-trooper.html?m=0
printed almost a year ago, forgot to share it here :)
Good printing I tried to paint it as minimal as possible
Great model, thanks! :)
Love the design. I should of made it bigger.
Painted by me :D
I am so pleased with this model. Thank you for sharing this.
Thanks for the model! It is beautiful
Amazing model first time using an airbrush. Thank you for a great one to try with
First finished print in 2019, started two days earlier in 2018. Thank you Paul for an awesome model! Printed in Hatchbox True White.
Printed in sky blue pla filament from "DasFilament" 0.2 layer hight
Thanks for the model! Was a fun first print
super nice final product. all my friends are jealous
Scaled down to 90% to fit my printer. Sanded, primed, and painted. Love the model!
Really happy with this, thanks for the great model! Printed on my Ender 2
Absolutely love this model! Super interesting to watch print too. I made a Octolapse of the print! youtube.com/watch?v=n3EJ5iInhmI
This was printed on a home built Hypercube 300 .06mm layer height. Time lapse of the print youtu.be/FqdMg4PIN4k
very cool print. thanks
Done at .1 with 30 in fill. Made using gold silk pla
My first Print & paint! Tks for share this .stl
My first finished print. This took me a very long time to sand smooth but I think it was worth it
Great print
I love this one
Modelo incrível! Estou ainda estudando pintura e aprendi bastante com esse modelo. Parabéns e obrigado.
Printed in Hatchbox White at 0.16mm; sanded, painted, colored with sharpie and india ink; showered in graphite powder
Made this one a while back. I did the fleshy bits from stuff i had around the house.
ENDER 3 0.1 layer 10% PLA silver 210 °C 4h18 d'impression avec support une imprimante pas chère et une qualité exceptionnel :)
Printed at 125%, 0.15 layer, 20% infill, with supports, white PLA primed and painted with acrylic paints
Printed with Dental Peach (Harz Labs) and Nanoclear (FunToDo) resins, at 30 micron.
30 micron resolution, Dental peach (Harz labs) and Nanoclear (FunToDo), printed on LumiCUBE
Painted a little bit
бронза с чернением
0.1 Layer Height . Excellent model!
0.1 Layer, with 10% infill and support on an Ender 5.
0.16 layer height 10% infill with supports ender 3 - cura - creawesome white PLA sanded down and painted
0.2 Layer, with 20% infill on a Formbot Raptor 2
50% of the original size, 0.05 layer, DLP with Anycubic Photon S Really great model to print ;o)
Thanks for the awesome model turned out great
Printed at 0.16 height, smoothed with acetone, painted with acrylic using airbrush and brushes. Great model, thanks for sharing!
keychain, 0,2 nozzle
Scale 50%; 0.15 mm layer
Very happy with the result. Thanks for this great model!
Very Nice
Cool Model
Impression sur MK3 MAKER de SmartCub3D. 100 microns
Printed at a 45° angle to get the most detail in the face.
Cool model
More work to do, but look great just off the printer. I used some old ColorFab BronzeFill.
I printed this at 60% size at 0.1mm layer height in matte white filament which really accentuates the detail. I printed it tilted back a bit so supports were mainly concentrated under the back of the chin and bottom of the back of the helmet. It took about 11 hours to print with 3 shells and it sits almost 5 inches or 8cm tall.
Turns out very nice. Thanks for the Design :D Filament from Sunlu doesend stick to bed (tested allot of temperatures), had to make a raft out of a different filament
Great model! printed at .16 layer height, had a filament runout that i caught early and only missed a couple layers. Bondo the line so its not noticeable. Sanded and sanded, filler primer a couple coats, base coat, hand paint/wash, then airbrush the rest with a tad of weathering. Very fun and awesome model!
Printed with 0.1mm layerheight with purple PLA from hobbyking
We did an awesome timelapse of this model. You can see it here: https://youtu.be/N0tHOV86p44
Printed on the Mars with clear resin at 0.05mm layers and painted.
Longer 10 Resin printer a little mess up on the front of helmet but amazing print, first print with my longer and it’s amazing!!
Thanks to creator for a very nice model to print and paint!. 0,2 Layer height. Filament nGen from ColorFabb. Colors from games workshop.
flying bear ghost 4s pla 60% scale
Amazing model. Printed on Elegoo Mars.
Great work @Braddock! Thank you! :)
Printed @0,1 layer, 5% infill, supports at bottom, 14 hours
Silver is automotive paint with varnish, the rest is acrylic paint. It is only 3cm high.
Thank you for an amazing sculpt. I had a lot of fun bringing this image to a fantastic finish!
Thank you for an outstanding sculpt. I had a lot of fun finishing it in post production. Many wonderful comments!
I love it:))
Awesome model. Great job Paul! Thanks alot. I really love it.
Awesome model, had to print again and add a Halloween treatment when finishing. Printed on a Formbot Raptor 2, 0.6 nozzle, 0.2 layer height with Overture PLA.
Awesome model, had to print again and add a Halloween treatment when finishing. Printed on a Formbot Raptor 2, 0.6 nozzle, 0.2 layer height with Overture PLA.
Total height of this model is around 2-1/2 feet tall. The Trooper is about 8 inches or so. Inspiration is from a scene in The Mandalorian in which you see a group of Stormtrooper's helmets on spikes/spears. 56 hour print on an Ender 3. Sanded for days, Bondoed and sanded for more days. Paint is a mix between spray paint and airbrushing with acrylic. Weathering was fun with added sand for effect. Added "greeblies" to the base to indicate maybe this troop was attacked looking for droids. This was a gift for my brother in which on the bottom I wrote, "These WERE the droids you were looking for."
Such a cool print! Had a lot of fun painting this.
My second print, love it!
Great sculpt! Printed at 0.12 layer height. First time painting a 3d-printed model, quite fun :)
Black base and copper rub n buff finish
Excellent model, printed well
nice print
Layer 0.2, support only from platform
Very good model. I printed this helmet hollow inside, and then filled it with plaster, it turned out weighty. I advise you to take note
Thank you
Insane level of detail at 0.1mm
Great model!!!
nice one
Printed both at 45%. Now to fill sand and paint.
Pla = SilK Silver Eryone Layer = 0,1mm Support = Yes Infill = 8% Wall = 3 Beautiful Relief and Depthness Effect
Fantastic print!
great print.
Fantastic !
Very nice model, thanks :)
This model is an amazing print! a must print if you have a 3D printer, Thanks for sharing with us Paul. I even done a timelapse of it too http://youtu.be/74Pf2yAgl34
This is one heck of a model. I love the detail in this! I printed it at 50% with .15mm layer height, 10% infill and a .4mm Nozzle. I printed on his "back" with supports. I will likely print another at somewhere between 70%-80% since this turned out a little smaller than I wanted. I may also experiment with a lower layer height.
Very cool object had a lot of fun painting it too!
My very first painting
came out great, took 10.5 hours original size. Printed on Paramount PLA. Had a blast painting this thing.
Printed with Wanhao i3 v1 UPGRADED with z-braces, dampeners, and a RAMPS board with ABL and DRV8825 stepper drivers. ABS with no enclosure and fan at 50%. NO infill. ( I pretend to fill it with clay and sand ) 4 walls. ( 4mm nozle @ 235 degrees C.) Support ONLY touching the bed. Heated Bed @ 90 degrees C. + BuildTak. 0,05 MIND BLOWING LAYER HEIGHT! ( Amazing design btw ) Time to print 7:30 hs more or less...
One of my very first prints ever. I'm still playing with slicers and settings, but it came out great. I had some issues with supports, but I think that can be fixed in slicer settings. 0.15mm layers, 100% scale, took around 24h, but that's probably because my settings.
Obligatory Death Trooper print :)
Printed in Sunlu PLA+ And painted with acrylics.
Here is my attempt
added bloody eyeball,,ya know for fun.great model,fun painting
@Braddock an Awesome design, thank you very much for sharing, here are a couple of images of what I did with your design
My first time painting a print. Glad I chose this awesome model.
0.05mm resolution, painted with a combination and acrylic and oil paints for effect.
Absolutely incredible sculpture! It turned out really well in this silver PLA. Dimensions 15 x 15 x 15.6cm. Well done designing!
super model
super modèle
Great Design! Printed in Orange Pla. Made a 4K timelapse video with detailed Cura settings... https://youtu.be/yHMES0q6AsQ
My first try at color job. Took me sometime but I got there. Thanks Braddock for this great model.
Such a great design. My first paint job. Thanks Paul Braddock
hand painted, 5 cm tall
This was my very first Print on my Photon S Pretty Happy with how it turned out. Great model. Would love to see a Darth Vader.
Now we know why this model is so popular! Amazing design!
Here is my attempt. Came out pretty good. I am very pleased.0.15mm layer with support structures and printed a brim to get good adhesion. 75% scale. Build took about 14.5 hrs to print.
great model , thank you :D
hello c'est vraiment un super modèle ! félicitations !!!
Very happy with my results. You can see the video at youtu.be/XeFSt_Xc7cM Printed with FLSUN Q5, PLA Basic, 0.12mm layer height. Acrylic paiting.
Printed on the Anycubic Mono X in clear resin
Printed on the anycubic mono x in clear resin
Muchas gracias por hacer esta figura fabulosa, te paso como lo he pintado, gracias Artillery Genius
Muchas gracias por hacer esta figura fabulosa, te paso como lo he pintado, gracias Artillery Genius
Fail at top layer, maybe too cold (185°C)... but i really enjoy to paint it ! Paul you did an awesome job ! Really thank you
Great model and painted using Tamiya Acrylics and Vallejo Model Air. Airbrush 60%, Hand Painted 40%
Great model and painted using Tamiya Acrylics and Vallejo Model Air. Airbrush 60%, Hand Painted 40%
espero que os guste :)
Awesome model, Thanks Paul!
This is a really incredible model. I chose it to be the first model i paint and thankfully had a failed print to test on. I might have gone a little overboard, but I'm still happy with how it turned out.
great model.. one of the best.. printed great and detailed up just fine.
Really cool model. Print came out great. I made mine pretty distressed with my airbrush.
Fantastic model, really enjoyed this project. Cracking detail! Print on Elfin 2 Mono SE with resin
Great print
Love it!
Saw this and just had to print. Just begged to be painted and weathered, just hope I did it justice!
Great model, one of my first prints and paintjobs. Thx for this...
I printed upside down an works very nice 0.20 at 50mm/s 100% scale 6h aprox
Absolute blast to print and paint!
Printed on a monocromatic Elegoo mars 2 with Elegoo gray resin. First time of model painting; this is a realy cool model, completed in about 5 days.
Grey Resin and painted with acrylic.
Avec led intérieur / with led inside
My Version.
thank you Sir.love this work
Printed as a Christmas present for my brother out of a granite filament
Printer: Creality Ender 3 S1 ~21.5 hours, Creality (Cura) Slicer, 120mm tall, 599 lines, 0.2mm layer height, 10% infill, rotated to sit horizontally with support material touching buildplate, optimized with Arc Welder. PLA, Amolen "C-Silk Green & Shiny Blue" https://www.amazon.com/dp/B096RC45QN/
Printed using PLA Sakata 850 Ivory 0.15 line height 3 shell 10% infill ETA 35h weight 248gr (Including Supports)
I finished yesterday... painted in spry.... THAN´S FOR FREE DESIGN!!! I'printed it at 20 cm high.
Love this thank you for the file. My print is a little bigger then a quarter. Paint inspired by someone's paint scheme I saw out there but cant find to give credit to. Thank if you see this.
Thank You! Pint scheme inspired by someone else's on the web couldn't find the person again so if they see this thanks.
Printed on Prima Select Wood PLA and post processed with Torch and light pigment.
Thanks, it's my first printing painted. 6cmx6cm 0.20 at 60mm/s Time: 2 hrs approx Fill 0% I will try to print it bigger
Printed with SLA Printer Anycubic Photon M3.
Printed full size on Elegoo Neptune 2S in PLA - excellent file
Tanks Paul!
Printed at 0.05 layer height. Second model that i have attempted to paint quite pleased with the results.
printed on a Creality LD-002H, Anycubic resin. Love this file! Turned out awesome.
printed on x1c with ERYONE Metal Luster Silk Rainbow Filament PLA. this came out really nice and had zero issues printing.
Oh boy. That was a great project. The details of the model are fantastic. Thank you so much for sharing!!!
Without a doubt, I’m very late to the party of acetone smoothing ABS prints but this, for the lack of another word, glossy boi looks very cool indeed! Printed in Overture ABS using 0.2 mm layers on a Voron v0.2.
Printed on a DreamMaker Overlord pro using variable layer heights (.12mm-.2mm) using hatchbox wood Pla. White frosting is residue left from using acetone and fine steel wool to reduce layer lines.