ED209 from Robocop
ED209 from Robocop
3D
Published 2015-02-05T10:11:48+00:00
3D Print this epic ED209 from the movie Robocop. The model is a remix of a 3d model by Onur AYTEKIN and was remodelled and resized to be printed on the Ultimaker 2. There were a lot of testing and printing of parts to get the look right, especially around Ed's Black Visor. Several iterations were done with different patterns. This 3D print model is made from 23 parts. The final build is approximately 210mm wide x 280mm deep x 245mm high The legs require "fix horrible" Type A and requires supports "everywhere" The images you see have very little post-production or painting and is taken straight from the printer, minus a little bit of sanding and polishing of the Bronze Fill printed parts.
Website: http://www.imaginables.com.au
_________________________________________________________________________
If you purchase this object through the MyMiniFactory Store please note:
-
This product will come unassembled and unpainted when you buy it. We encourage you to be creative, personalize it as you wish. Express your awesomeness and share a picture of the final result with us!
-
Unless you have a particular request, the colour of your print will be chosen at random and will be printed in either ABS or PLA filament.
-
Delivery time will be between 1 and 4 weeks from the moment you order the object. This is dependent on your location and the length of time the object takes to print.
-
Email info@myminifactory.com if you would like any further information or if you have any special requests.
-
Sometimes orders will be printed live on MyMiniFactory TV - check it out here.
_________________________________________________________________________
Print at 0.2 mm layer height, with 10% infill. This uses 555 g of filament and takes 49 hours.
| 发表的日期 | 05/02/2015 |
| 让时间去下载 | 2993 - 3000 分钟 |
| 材料数量 | 555 g |
| 尺寸大小 | 210mm wide x 280mm deep x 245mm high |
| 复杂程度 | 困难 |
Great design Thanks to Imaginables! printed with some of my own modifications J