Empty Surprise Egg
Empty Surprise Egg
3D
Published 2017-05-25T10:11:58+00:00
check out this version with an elephant inside: https://www.myminifactory.com/object/the-surprise-egg-36253
This is the empty version of the Surprise Egg. Fill it with the object of your choice in Tinkercad* or any other design tool. Offer it to someone once printed so that he or she can break it and discover the gift inside!
THERE MUST BE A 0.4MM GAP BETWEEN THE INNER FLOOR OF THE EGG AND THE BOTTOM OF THE OBJECT (so that, the object can be easily removed from the egg).
The shell is available in two sizes (50x50x61mm and 75x75x91.5mm).
*Start editing the object in Tinkercad right now: medium size/big size.
For a better result, use a 0.1mm printing layer height.
You can reduce the gap between the floor of the shell and the bottom of the object from 0.4 to 0.3mm to improve the printing quality (the object might be more difficult to remove from the egg).
| 发表的日期 | 25/05/2017 |
| 尺寸大小 | 50x50x61mm/75x75x91.5mm |
| 打印工艺 | FDM |
| 复杂程度 | 容易 |
| 支持自定义 | YES |