Exclusive: Flexi Factory Tortoise
$39.95 Exclusive: Flexi Factory Tortoise
Published 2024-05-30T22:01:16+00:00
Now Available Again for MEMBERS ONLY to purchase!!! $3.99 with discount provided to Members.
I am so excited that the tortoise was the winner of February's member vote!
Not only did I get to try some of my new favorite matte gradient PLA's (they make the cleanest, smoothest prints), but got a chance to improve the lid mechanism.
As you can see, I went a step further and made this one with the added feature of a box top! This gives unlimited color combinations AND a place to store your goodies :) I spent alot of time working out the top locking mechanism. Just set the shell in place, and give it a squeeze. It has a satisfying pop, hahaha. It is intentionally a secure fit, but should loosen up the more you open and close it.
There is also a second model, print-in-place version. What?!? Two Exclusive models!
Printing Tips and Info:
- stl versions and 3mf versions (for printers with multi-color ability) are included.
- 3 walls, .12 or .16 layer height, no supports (they may hinder functionality), 15% infill suggested
- I use a disappearing purple glue stick for great adhesion.
- Test printed between 50% and 200%. The mini version is adorable and the lid does work :)
- 200% mom and 100% kiddo printed with: Isanmate Yellow/Green for the body and Overture Fossil Rock for the Shell. 100% with green shell and brown body is just swapped but doesn't get through all the colors like the bigger ones.
- 100% 3mf printed with: Isanmate PLA+ Rainbow and Bambulab PLA Matte Grass Green
- 65% stl printed with: Amolen Red/Gold shell and Cookiecad Mint Chip for the body. Love, love, love cookiecad.
I hope everyone has a wonderful weekend! Happy Printing- Dan
Printing Tips and Info: Most of the PLA below can be found on my Amazon Page HERE
- stl versions and 3mf versions (for printers with multi-color ability) are included.
- 3 walls, .12 or .16 layer height, no supports (they may hinder functionality), 15% infill suggested
- I use a disappearing purple glue stick for great adhesion.
- Test printed between 50% and 200%. The mini version is adorable and the lid does work :)
- 200% mom and 100% kiddo printed with: Isanmate Yellow/Green for the body and Overture Fossil Rock for the Shell. 100% with green shell and brown body is just swapped but doesn't get through all the colors like the bigger ones.
- 100% 3mf printed with: Isanmate PLA+ Rainbow and Bambulab PLA Matte Grass Green
- 65% stl printed with: Amolen Red/Gold shell and Cookiecad Mint Chip for the body. Love, love, love cookiecad.
发表的日期 | 30/05/2024 |
Price | $39.95 |
支持自定义 | YES |
Makerlab jelly bean glow.