Exversa Juno 6mm Carbon Mini Quad - No Shell - Pre-order
Exversa Juno 6mm Carbon Mini Quad - No Shell - Pre-order
3D
Published 2017-05-12T14:03:07+00:00
This is a No Shell version which means you can buy the 6mm carbon frame, titanium and standoffs. You will have to print your own shell downloadable via Thingiverse.
With the design experience of the Apollo, we maintain the teardrop shape. To make sure the Juno is enclosed with the most aerodynamic shell.
The Juno is made of top grade materials. We use 6mm 3K Twill weave carbon fiber, Titanium and 3D Sintered nylon to craft an object of pure form and function.
The sleek arms insure that nearly all thrust generated by the props is 95% unobstructed, by having them at 6X10mm they still remain the mandatory stiffness.
The top plate has a built-in camera mount for both regular Go Pros as wel as RunCam sized cameras. Also it insures proper cooling without interfering the airflow. So no need for extra 3D printed mounts that often increase the weight notibly.
Get the most value for your money and buy the Juno together with the EX-Foot 2207 2600KV motor to get the most out of the Juno's aerodynamic shapes! (www.miniquadtestbench.com/xfoot-2207-2600kv.html)
Base: 220 - 250
Weight: 78g 5" - 85g 6"
More info about the EX-Foot 2207 2600KV Motor: www.exversadesign.com/product-page/ex-foot-2207-2600kv
Included with the Juno are the following parts:
1x Set Antenna Tubes
1x 6mm Cabon Center Body
2x 2mm Carbon Battery and FC Mounting Plates (cross fiber)
6x 6x10mm Carbon Arms
1x Standoff Kit
20x M3x12 Titanium Screws
7x M3 Self Tapping Shell Screws
1x 2mm Hex Wrench
1x Prop tightner and Exversa Keychain
| 发表的日期 | 12/05/2017 |
| 打印工艺 | FDM |
| 复杂程度 | 容易 |
