Geared Cube, Hand Crank Edition
- 游戏和玩具>
- 玩具 |
- 教育>
- 物理 |
- 教育>
- Kindergartens |
- 教育>
- Elementary Schools |
- 教育>
- Middle Schools |
- 教育>
- High Schools
Geared Cube, Hand Crank Edition
3D
Published 2017-03-28T15:37:56+00:00
Emmett's geared cube, with a hand crank.
Video of pre-lubricated just off the printer version is here: https://www.youtube.com/watch?v=jfh5DNGP8tw.
Printed in PLA on a Makerbot Replicator 2 using Makerware 2.3.3.42 "Standard" settings.
A video of the heart version test fit is here: https://www.youtube.com/watch?v=o8CkCe5A-1w.
Your cube pieces should all spin on their respective pins as easy as this before assembly. If not, follow the "Geared Heart, Motorized Edition, Version 2" procedure.
Study "Assembly.skp".
Print emmett's "CubeGears2-3.stl". If you can edit the file, you can delete one of the large corners, the center hub, and one pin before printing as these parts are not used. Clean up any stray filament in the gear holes. See Geared Heart, Motorized Edition for the steps I performed in loosening up the geared cube as the it must spin freely.
Print all parts. While printing "Top.stl", I paused the printer at 4.2mm and changed filament from black to silver.
Test fit, file, sand, etc. for smooth operation. Lubricate the gears, "Gear Wheel Hand.stl" bushing surface and "Wheel Hand.stl" bushing surface using white lithium grease or petroleum jelly before final assembly.
| 发表的日期 | 28/03/2017 |
| 打印工艺 | FDM |
Great cube! I made a video about it: https://youtu.be/jTQK6ZrL2QM