Glock 17 Magazine Pouch IPSC
Glock 17 Magazine Pouch IPSC
Published 2016-03-21T13:41:55+00:00
Glock 17 magazine pouch IPSC. Fits well into the pouch straight from the printer. Can be easily modified if needed. Has a hole at the bottom for a magnet to mount for extra magazines.
Orientation of the print - For the main body I orient it with the pouch in vertical and the part that goes on the belt stays at that given angle. The belt clip is printed in a flat position (horizontal) so you may need to rotate it.
It's a solid fill as the weight does not make much difference. I used a high strength magnet for the holster to make sure the magazines don't fall off.
For the belt clip screw i used:
M4-0.7 x 16 Button head hex socket screw
M4-Nyloc Hex Nut
Both are 316 Stainless
For the magnet, you will need to use a suitable screw for the magnets that you purchased. For mine I had to use a M5 screw. And don't forget to use loctite.
Happy printing.
Visit and like us at https://www.facebook.com/innovativehobbysolutions
发表的日期 | 21/03/2016 |