Half an Pine cone (Photogrammetry)
4,456
views
159
downloads
1
collection
1 comments
Loading comments...
Half an Pine cone (Photogrammetry)
3D
Published 2017-11-30T12:27:24+00:00
8
1
Add to Collection
Description
Scanned an pinecone I've picked up from a garden in France.
Sliced into half for easy printing on the base. Can be use to stick on walls for Decor if necessary. Creativity is up to you guys!
The model itself is rather small, size it up to 300-400% for a real-life size
This model has 100,000+ Mesh Faces, recommended to slow your printer speed to get the most detail out of it (perhaps 40mm-60mm/s for infills and perimeters)
Go high layer resolution on this one. 0.1mm Layer height will do the trick!
Printing Details
Print with flat side down. Use support. NOTE: This object is very small and the print specs are for it scaled up 500%.
Technical Information
发表的日期 | 30/11/2017 |
让时间去下载 | 177 - 177 分钟 |
材料数量 | 27g |
尺寸大小 | 70.0mm x 73.8mm x 43.8mm |
打印工艺 | FDM |
复杂程度 | 中级 |
More Information
Object Parts