Macro Smartphone Clip
Macro Smartphone Clip
3D
Published 2014-07-09T15:18:22+00:00
The clip takes about 35 minutes to print and then a small lens is inserted to acheive a large magnification of the subject. The feet on the bottom of the clip act as a focal point stabilizer, just rest them onto the subject to gain focus. The clip can be attached to a wide variety of smartphones and tablets however something with the thickness of an Iphone should work best.
Once the clip is printed you will need to slot the lens in, Clip onto your device and experiment. You Can get a lens from any laser pointer or similar, the ideal size would be around 10mm - 12mm in diameter. Alternatively you can grab a bag of 20 from here https://www.dx.com/p/12-5mm-mini-secondary-optics-plastic-20-pack-4588#.U713DPldWSo.
| 发表的日期 | 09/07/2014 |
| 让时间去下载 | 30 - 40 分钟 |
| 材料数量 | 10g |
| 尺寸大小 | 41.5mm x 15mm x 31mm |
| 复杂程度 | 中级 |
