MIB 1 Neuralyzer V. 1
MIB 1 Neuralyzer V. 1
Published 2019-05-15T17:12:06+00:00
See this for the new model https://www.myminifactory.com/object/3d-print-84866
It's a lot more details but might not suit everybody, so v1 stays up =)
I liked Frederico David Senas Neuralizer (https://www.myminifactory.com/object/mib-neuralizer-men-in-black-4806) but i did not like that it was not as screen accurate that i wanted so i made one myself.
This is not a remix but Frederico inpired me.
I haven´t printed all the parts myself but they are in the printer as i type =)
Thus the picture is only a representation without all the items.
Everything needs to be glued together and i intend to put some stickers with graphics on the dials and panel, i will upload my graphics later.
found a problem with the panel.stl so i will upload a new one shortly. it wont be affecting the other parts and the issue I will be addressing is with the pullout height.
2017-05-14 10:40 Replaced original file with "Panel_v1.1.stl"
(old file will still work but you will have to adjust it some)
2017-05-15 Replaced "Lens.stl" because the first was to big
Post Printing
I left the slot in the case intentional tight so the panel would not slide out as easily, you will have to adjust the hole in the top of the case to fit your printers tolerances.
This is easiest done with a sharp hobby-knife or a small file.
发表的日期 | 15/05/2019 |
打印工艺 | FDM |
复杂程度 | 容易 |
OK