Moon Spinner
Moon Spinner
Published 2017-07-12T10:34:45+00:00
This object was made in Tinkercad for the My Mini Factory Tinkercad Competition.
https://www.tinkercad.com/things/4xi8DroAX7p
This is a fidget spinner designed to teach kids about the phases of the moon while having some fun. This fidget spinner has the phases of the moon, one on each of the 6 prongs. Kids can spin this to represent how this cycle never stops, continually repeating again and again. This design also includes some 3D printed fidget spinner bearing caps designed to fit the standard 608 bearing.
It is recommended that you print this at 50% infill, as some parts of this fidget spinner (primarily the connections between each phase and the center of the fidget spinner) are a bit weak. This item does not need a raft, because it is flat. However, make sure that your slicer adds supports beneath the 6 prongs, as they are a few millimeters off of the ground. If needed raise this object on the z-axis to convince the slicer that it really does need supports.
发表的日期 | 12/07/2017 |
材料数量 | 9 grams |
尺寸大小 | Moon Spinner: 80mm x 80mm x 7mm || Bearing: 25mm x 25mm x 4.5mm |
打印工艺 | FDM |
复杂程度 | 容易 |