Reduced Lid with 7 Card Holder v3.0
Reduced Lid with 7 Card Holder v3.0
3D
Published 2018-01-29T11:51:06+00:00
Finally Finished!! Here is a personal mod for the dock of the Nintendo Switch.
It was designed In order to prevent the infamous screen scratch made by the front lid of the Nintendo Dock, I liked the idea of this reduced lid. There is no need to damage or alter the original pieces provided in order to change the lids and the same screws can be used with this model, as a bonus I added 7 cardtridge holders so the games could be exhibited when not used.
This model currently has 3 presentations: A Nintendo Switch logo, a plain blank model for the ones who prefer to paint a custom design and a model containing joelbot from 3D Printing Nerd.
You can find the timelapse of the print here:
I recommend this video from Spawnwave for reference at the time of taking apart the dock:
or if you prefer there is also this ifixit link:
This model came as inspiration from AY @amazingyen: https://www.myminifactory.com/es/object/nintendo-switch-front-panel-retrofit-32193
I'm confident in the version uploaded since it took many tries and errors, but if you find a flaw or something that can be corrected please let me know.
*** Still updating the information of this model***
I recommend printing in the direction shown in the slicer (cardtridge holder view facing the build plate) in order to have the screw pillars, the led support and the connecting labels as clean as possible.
Also, if the light diffuser doesn't fit smoothly please sand it a little and it should fit just fine.
| 发表的日期 | 29/01/2018 |
| 尺寸大小 | 172.8x44x18 |
| 打印工艺 | FDM |
| 复杂程度 | 容易 |
No need for any supports if you print at .15 and have it on the angled face.