Rock Climbing Hold - Small & Mid Incut
Rock Climbing Hold - Small & Mid Incut
3D
Published 2015-11-18T12:51:36+00:00
Small & Mid sized incut edges for your home climbing walls (Small: Mid: 160x74x40mm).
The pictures show the Small hold printed in a carbon/nylon filament but any filament can be used. It is best to lightly sand down the part after printing to remove the shine and provide a little more grip. These holds will work best on overhanging walls - anywhere from 5 to 50 degrees.
These have been designed to take Countersunk M10 bolts and 5mm wood screws.
If you print in PLA please leave 72 hours between the end of printing and first use to allow the print to relax and attain its optimal strength.
Get in touch if you want any more sizes and I'll see what I can do.
I have had success printing with a layer height of 0.2mm, 4 perimeter shells and 40% rectilinear infill. If you try with any other settings please let me know how it turns out.
| 发表的日期 | 18/11/2015 |
| 让时间去下载 | 130 - 380 分钟 |
| 材料数量 | Small: 34g, Mid: 110g |
| 尺寸大小 | Small: 106x50x27, Mid: 160x75x40 |
| 打印工艺 | FDM |
| 复杂程度 | 容易 |
| 支持自定义 | YES |
Climbing Hold Small, left and right.