Screen Stand - Siel 3D
Screen Stand - Siel 3D
3D
Published 2018-04-23T16:24:11+00:00
It´s a computer screen stand that will higher your screen 50mm. I designed this stand beacause the middle of my screen wasn´t horizontally with my eyes. Therefor i raised it 50mm which was perfect and i hope it will be good for some of you guys.
It will be three main parts and those are two legs and one plate that your monitors foot wil be standing on. Last parts you need are some connectors that you need to connect the two leg parts together. Two 10mm connectors and one 6mm connector.
Hope that 50m is the sweetspot and that you like it!
One leg part took approximately 6 hours on my Prusa i3 mk2 and one plate took approximately 3 hours. The connectors took around 20min.
Everything together takes around 18-20 hours.
I printed the leg part with 15% infill and the plate with 20% infill. This worked out very good for me. 20% infill for the legs are unnecessary.
| 发表的日期 | 23/04/2018 |
| 打印工艺 | FDM |
| 复杂程度 | 容易 |
| 支持自定义 | YES |