Sports Car - One piece print with moving wheels
Sports Car - One piece print with moving wheels
3D
Published 2017-03-29T09:49:17+00:00
Sports Car model that prints on its wheels which will spin free once the designed in support is removed.
This model includes 'lateral support' so the axle ends flush with the side of the wheel. The support provides just enough support to allow the axles to build correctly so the wheels will spin freely once the support is removed.
Great example of what can be 3D printed... read instructions for more details.
This model has built-in support, no additional support is needed. Ensure you have good bed adhesion. Recommend 3 shells and 10%-20% infill. Carefully remove support and clean around wheels. Gently work them loose and apply a little silicone based lubricant and they will turn freely.
| 发表的日期 | 29/03/2017 |
| 让时间去下载 | 60 - 90 分钟 |
| 材料数量 | ~15 grams |
| 尺寸大小 | 85mm x 41mm x 24mm |
| 打印工艺 | FDM |
| 复杂程度 | 中级 |
