Stand for the Blinkenrocket
Stand for the Blinkenrocket
Published 2018-04-03T18:02:42+00:00
I happened to be on the 34C3 in the talk Blinkenrocket! and instantly fell in love with the project and bought one of the sets and soldered it.
The project homepage can be found here.
Since the occations on which I can wear the rocket are really rare and I dont want to hide it in a drawer, I desinged a litte stand for the rocket.
It is a little top-heavy, but its stable enough. I added a version which is 70 instead of 50 mm long if you want to make shure that the rocket won't fall over.
The fusion 360 file can be found here if you want to view or modify the object
Resolution: 0.2 mm (the upper 10 mm were printed with 0.1 mm layer height)
Infill: 20%
I used 3 perimeters because I printed with glow in the dark filament. I thnk the additional weight helps to make it a litte more stable.
发表的日期 | 03/04/2018 |
材料数量 | 10.5 g |
尺寸大小 | 50 (70) x 50 x 20 mm |
支持自定义 | YES |