Super simple dual filament spool holder for Rostock Max
Super simple dual filament spool holder for Rostock Max
3D
Published 2018-03-19T12:58:00+00:00
Made these little guys up to hold dual filaments on the Rostock Max stock mount. Worked great for ages till I got a Polybox.
Found other filament spool feeders/holders online but they were mostly way OTT things taking ages to print and tons of plastic.
These will not!
Just use a 12mm tube (carbon fiber tube pictured) between the two stock towers on the Rostock Max. I put some tape on the end to ensure the filament spools didnt slide off.
You could print a 12mm tube too but best to use something slidey and premade like the carbon fiber or plumbing pipe.
0.20 mm layer height should be fine.
Ive suppled 3 files:
"Larger Spacing Complete Dual Filament spool tube adapter" = Complete unit, print with supports, preset to slide (tightly) onto Rostock filament holder.
"2nd half Dual Filament spool tube adapter" & "1st half Dual Filament spool tube adapter" = two parts, screw or glue together, likely doesnt need supports and can be tailored to different widths for clamping on other things.
| 发表的日期 | 19/03/2018 |
| 让时间去下载 | - 35 分钟 |
| 材料数量 | 9g |
| 尺寸大小 | 34x42x15mm |
| 打印工艺 | FDM |
| 复杂程度 | 容易 |
| 支持自定义 | YES |