TABLO Tablet Organizer SINDOH OLD
TABLO Tablet Organizer SINDOH OLD
3D
Published 2018-07-16T18:05:51+00:00
This is for the Sindoh submission competition!
NOTE: The more final version is here instead: https://www.myminifactory.com/object/3d-print-70184
I designed this Tablet Organizer for my grandmother, which she uses inside at the table and outside on the patio. It is strong and not flimsy, holding small (phone) and large tablet. We have extension for the top where it can also help for books and magazines. It has many holes to make it modular (it can be hung on wall or other areas, like in front of exercise machine). For adjusting the tilt of the device, we have a peg-ladder system, where we found suitable tilt adjustments. There are pockets on the side for holding pens, or the pockets at top can be used also for storing things (batteries, paperclips, scissors, etc.).
I have used both PLA and ABS for printing. At 40% the slicer (Simplifed3D) said 48 hours, so we tried 30% (that took 19 hours) and 20% (takes about 15 hours). The main base (TABLO) does not need supports. The Pegs also do not support. But support is needed for printing the Extension piece.
| 发表的日期 | 16/07/2018 |
| 让时间去下载 | 14 - 48 分钟 |
| 材料数量 | 258g |
| 尺寸大小 | 145x225x150mm |
| 打印工艺 | FDM |
| 复杂程度 | 容易 |