The pebble-Pebble by CrumbEyes
The pebble-Pebble by CrumbEyes
Published 2015-03-16T08:25:06+00:00
Pebble Time Competition
This is the pebble-Pebble...
please hold your applause.
Included in the download are (see diagram):
1. The main Pebble section.
2. The Pebble door.
3. The Pebble door part.
4. The tray to hold the pebble-Time watch.
5. The tray button lock.
6. The buttons to control the watch when inside the pebble-Pebble (x4).
I tested my design using a printed model of the "pebble-Time" (I used "Glow in the Dark" PLA for the watch screen ;)
(The white stripes in the pebble design are made by swapping the PLA color in the printer, while it was printing.)
Have fun!
CrumbEyes.
Print at 0.2 mm layer height, with 10% infill. This uses 56 g of filament and takes 315 minutes.
发表的日期 | 16/03/2015 |
让时间去下载 | 315 - 325 分钟 |
材料数量 | 56 g |
尺寸大小 | multiple parts |
复杂程度 | 容易 |
支持自定义 | YES |