Torbjörn Armour Pack
Torbjörn Armour Pack
3D
Published 2017-04-03T12:34:55+00:00
Armour pack of the mighty Torbjörn from Overwatch.
Designed specifically for smaller printers so people dont have to slice things up in Meshmixer or Tinkercad.
Estimated at 84 hours and 44 minutes print time using my own print settings in Simplfy3D. Obviously less if you have more than one. The central pieces have holes so everything can be aligned properly in assembly.
Parts required to make the complete Armour Pack are as follows:-
Top Right Back x 1
Top Left Back x 1
Bottom Right Back x 1
Bottom Left Back x 1
Top Right Front x 1
Top Left Front x 1
Bottom Right Front x 1
Bottom Left Front x 1
Right Handle x 1
Left handle x 1
End Cap x 2
End Cap Top/Bottom x 2
Side Panel x 2
Shield x 2
Hole Button x 8
Pin x 20
If parts are importing small just increase the scale to 1000% to get the dimensions stated.
Happy printing makers!!
Up-scaled parts by 800%. Printed on medium res with no supports except the handles. Printed easily, slightly difficult to assemble though as connecting pegs were really tight.
| 发表的日期 | 03/04/2017 |
| 让时间去下载 | 986 - 1031 分钟 |
| 材料数量 | 212.20g |
| 尺寸大小 | 160 x 150 x 60 mm |
| 打印工艺 | FDM |
| 复杂程度 | 中级 |