WiFi controlled Desk Lamp
4,785
views
330
downloads
10
collections
0 comments
Loading comments... 
WiFi controlled Desk Lamp
3D
Published 2019-09-02T10:35:14+00:00
70
0
Add to Collection
Description
Summary
A WiFi controlled Desk-Lamp, essential for every 3D-Printing enthusiast and a great way to get into coding.
Controlled via an easy to use Webinterface that runs on the ESP8266. It also features an optional Sound-Sensor to react to music.
Full Instructions and Software Setup can be found in Instructions.pdf
Bill of Materials
- 1x Wemos D1 Mini is recommended, but any other ESP8266 variant should work too, but it might require an additional step-down converter.
- 2m WS2812B LED-Strip IP30, make sure you choose IP30 any other IP rating will not fit. A strip with 60 LEDs/m is recommended.
- 1x Microphone Sensor, (optional)
- 1x 3.3V to 5V Logic Level Shifter], (optional, required if LEDs "glitch")
- 1x 3 Pin Wire
- 12x M3*8mm bolts
- 8x M3 Nuts
- 1x Female Power Jack
The links above are affiliate links
允许
Printing Details
Resolution: 0.2mm
Infill: 100%
Filament: ICEFILAMENTS PLA White & Black
Support & Raft: not required
The hull must be printed in white filament, all other parts can be printed in any color.
Technical Information
| 发表的日期 | 02/09/2019 |
| 让时间去下载 | 240 - 700 分钟 |
| 材料数量 | 150g |
| 尺寸大小 | 70mm x 70mm x 220mm |
| 支持自定义 | YES |
More Information
Object Parts