[WIP] 75mm grodan cube cover w/ watering holes
5,622
views
104
downloads
2
collections
1 comments
Loading comments...
[WIP] 75mm grodan cube cover w/ watering holes
3D
Published 2018-02-23T11:45:07+00:00
21
1
Add to Collection
Description
This is a [Work in Progress] cap to cover the 75mm grodan stonewool blocks.
Features:
-aims to disperse water semi-evenly into the block.
-should prevent algae growth.
-should help to keep the moisture inside the block and lessen transpiration directly from the wet medium.
-6 mm hole for temp sensor
Details:
-wasn't printed yet, will be in a few days
-Dimensions(LxWxH)[mm]: 75x75x15
-Hole sizes: watering holes are 2mm, the opening for the tubing is 10mm
-the slide in opening for the stem is 10mm
This model will likely be revised several times, and is foremost a prototype, if you print it and have any problems/suggestions fell free to contact me
Printing Details
none
Technical Information
发表的日期 | 23/02/2018 |
让时间去下载 | 120 - 150 分钟 |
材料数量 | 31 grams |
尺寸大小 | 75x75x15 |
打印工艺 | FDM |
复杂程度 | 容易 |
支持自定义 | YES |
More Information
Object Parts