rowiac's Print of voronoi stytle mask
Community Print 3D Print of voronoi stytle mask
Published 2019-01-23T16:45:54+00:00
11
0
Printed on: Ultimaker Original+
Material: PLA
Description
This is a voronoi object, so no support should be required. Set object on the build plate standing up. Use brim to hold is securely to the plate. To minimize stringing on an FDM printer, print at as low a temperature as possible (e.g., 180°C for PLA) and at a slow speed (e.g., 20 mm/s). Set movements to a high speed (e.g., 200 mm/s).