kikkenassminis's Print of Bruni
Community Print 3D Print of Bruni
Published 2023-11-26T07:30:34+00:00
1
0
Printed on: Creality
Material: PLA
Description
For anyone who is wondering you CAN print these parts individually and assemble them (sort of) I printed the body and blue part of eyes at the same time. The belly area, toes and white of the eyes and snowflakes at the same time. The mouth alone and the black of the eyes alone. It takes some careful planning a little bit of filing and dry fitting but you can get the toes and belly on just fine. The white of the eyes the blue iris and the black pupil will all "fit" but not without some filing first. The mouth part must be inserted before you glue on the white belly. The mouth part might need some force to slot in (the normal thickness one broke easily the thicker one was a better choice though the roof of the mouth also broke and had to be glued in place.) All in all its not supposed to be printed in parts and assembled but CAN be done if you are creative and patient enough.
Printed on the Creality K1 Max
Multicolor Print used Sunlu Silk PLA in Blue and Pink. The White was done in Creality HyperPLA White and the Tricolor print was done in OVV3d Tri-color Silk - Blue, Green, Red