CAN WATER FILTER PROJECT FOR DEVELOPING COUNTRIES
CAN WATER FILTER PROJECT FOR DEVELOPING COUNTRIES
3D
Published 2018-02-21T09:54:26+00:00
*Updated model with improvement for better and easier printing (see new pictures using aqua PETG)
A low cost and easy to print part to re-invent used aluminium drink can by converting it into a multimedia water filtration system for developing countries. We hope to kick start this project to maximize its positive social impact and value. Promo brochure and video are ready.
Designed and engineered by DreamerLearner.
Thank You Very Much!
*Branded for MyMiniFactory 3D Design Competition sponsored by ESSO <- Many Thanks for this great opportunity!
*Project is under continuous testing, improvement, and optimization
@DreamerLearner
Black Pictures - Print 0.3 mm layer height with 15% fill.
Aqua Pictures - For better result, use 0.2mm layer height with 30% fill, 1.2mm wall and top/bottom thickness.
Can be print lay down or opening in Z Axis with support.
| Date published | 21/02/2018 |
| Benoetigte Zeit | 150 - 200 Minuten |
| Menge an Filament | 30g |
| Dimensionen | 60.0 mm x 44.7 mm x 60.0 mm |
| Technologie | FDM |
| Schwierigkeitsgrad | Easy |