iPhone 6 Dock Stand
29,763
views
1,809
downloads
4
collections
2 comments
Loading comments...
iPhone 6 Dock Stand
3D
Published 2014-09-30T04:33:06+00:00
76
2
Add to Collection
Description
Here a nice iphone 6 dock stand, printed on high res, no supports and around 25% infill. Have fun!
Printing Details
Print at 00.2 mm layer height, with 25% infill. This takes 200 minutes and uses 41.3 g of filament.
Technical Information
Date published | 30/09/2014 |
Benoetigte Zeit | 200 - 200 Minuten |
Menge an Filament | 41.3 g |
Dimensionen | 80 x 74 x 75 mm |
Schwierigkeitsgrad | Very Easy |
More Information
Object Parts
Model printed well. Fits my iPhone 6s very well. I think the cable I used is the original Apple branded one that came with the phone. I had to use a needle file to open up pretty much everywhere the model comes in contact with the cord. It could use just a little bit more tolerance. I printed with the finest layer height I could (0.0875mm). I also had an earlier attempt with more coarse layer height where nothing fit. Sliced in Cura. Had to rotate to get it oriented properly. Overall I'm very happy with this model. It's not perfect, but it's very, very good!