OpenBeam Optical Rail Simple Rod Holder
OpenBeam Optical Rail Simple Rod Holder
3D
Published 2015-04-24T12:10:32+00:00
This is part of a system of prints that turns an OpenBeam into an optical rail. This part connects 8mm rods, which hold optical components, to the optical rail. An optical rail is a long, straight, sturdy rail onto which optical components such as light sources and lenses can be bolted down and easily shifted along the length of the rail.
Commercial optical rail sells for $380/m ($115/ft). Open beam only costs $12/m for the fancy black anodized stuff. You get the idea.
This component is part of the Open-source optics project, whose goal is to radically reduce the cost of scientific optical hardware: by the Michigan Tech's Open Sustainability Technology Research Group.
Print at 0.2 mm layer height, with 10% infill. This uses 2 g of filament and takes 24 minutes.
| Date published | 24/04/2015 |
| Benoetigte Zeit | 24 - 34 Minuten |
| Menge an Filament | 2 g |
| Dimensionen | 15 mm x 15 mm x 20 mm |
| Schwierigkeitsgrad | Very Easy |
