Rose USB Flash Drive
3,293
views
138
downloads
0 comments
Loading comments... 
Rose USB Flash Drive
3D
Published 2017-12-18T17:48:31+00:00
8
0
Add to Collection
Description
This is my model of a USB flash drive with a rose pattern on it.
You can use a regular slim USB flash drive with following dimensions 34,6x12,5x2,4mm. Perhaps slight modifications are necessary to fit the USB drive because this model is a tight fit.
Some tips:
If the USB flash drive is too lose just add some layers of thin tape around the end of the flash drive
If the USB flash drive doesn’t fit. Try to trim the sides (carefully!) make sure you do not harm the circuits. Only cut away the plastic.
Print details:
Printed without support, with 0,1mm layer height and 6 shells
Printing Details
Printed without support
with 0,1mm layer height and 6 shells
Technical Information
| Date published | 18/12/2017 |
| Benoetigte Zeit | 120 - 180 Minuten |
| Menge an Filament | 8,91g |
| Dimensionen | 49x11,5x21,8mm |
| Support Free | YES |
More Information
Object Parts