TribesStoreIdeenFORUMNEWCanvasThe AdventureNEWPhysical

Swivel Nozzle for Jet Engine, 3 Bearing Type, [Phase 1]

3D File Logo  3D

Published 2019-01-26T20:05:27+00:00

    Swivel Nozzle for Jet Engine, 3 Bearing Type, [Phase 1] image
    Swivel Nozzle for Jet Engine, 3 Bearing Type, [Phase 1] image
    Swivel Nozzle for Jet Engine, 3 Bearing Type, [Phase 1] image
    Swivel Nozzle for Jet Engine, 3 Bearing Type, [Phase 1] image
    Swivel Nozzle for Jet Engine, 3 Bearing Type, [Phase 1] image
    Swivel Nozzle for Jet Engine, 3 Bearing Type, [Phase 1] image
    Swivel Nozzle for Jet Engine, 3 Bearing Type, [Phase 1] image
    Swivel Nozzle for Jet Engine, 3 Bearing Type, [Phase 1] image
    Swivel Nozzle for Jet Engine, 3 Bearing Type, [Phase 1] image
    Swivel Nozzle for Jet Engine, 3 Bearing Type, [Phase 1] image
    Swivel Nozzle for Jet Engine, 3 Bearing Type, [Phase 1] image
    Swivel Nozzle for Jet Engine, 3 Bearing Type, [Phase 1] image
    Swivel Nozzle for Jet Engine, 3 Bearing Type, [Phase 1] image
    Swivel Nozzle for Jet Engine, 3 Bearing Type, [Phase 1] image
Loader
360°
  1. Bildung |
  2. Store
8,087 views
Community Prints Add your picture
Be the first to share a picture of this printed object
2 comments
    Loading comments...

    $10.00 Swivel Nozzle for Jet Engine, 3 Bearing Type, [Phase 1]

    3D File Logo  3D

    Published 2019-01-26T20:05:27+00:00

    Motoo Kondo

    @konchan77

    99 objects

    281 Followers
    Add Files To Cart $10.00
    +VAT/Sales Tax (if applicable)
    92% goes to the Creator
    (excluding payment processing fees)
    23 2 Add to Collection
    Description

    [IMPORTANT NOTE] 2021.6.2 added 2021.6.16 revised
    ==================
    It took a long time due to the complicated motion of this model, but finally I can develop the new model od "Motor Driven Version", so I uploaded a photo of the prototype.
    If you are interest in this version, please do not download these [Phase 2, 3, 4] and wait for a while.
    Almost parts of [Phase 1] are used in this version.
    "Motor Driven Version" is uploaded on 2021.6.16. Object=174275
    ==================

    This is the Swivel Nozzle called 3 Bearing Swivel Nozzle (3BSN) for Jet Engine for the recent STOL Fighter.
    For STOL, 3 Lifting Forces are used as follows;
    [Front] “Lifting Fan Unit” driven by Engine.
    [Sides] “Bleed Air Ducts” bleeding from Engine Compressor.
    [Rear] “3 Bearing Swivel Nozzle” directed Engine Exhaust. --- ●This Model
    Unfortunately I never see the actual unit, then this is designed only my imagination.
    Swivel Nozzle for Jet Engine, 3 Bearing Type

    This model was designed in order to understand what the elements are required and how to move to get STOL position.

    A. Design points:
    This model consists of 4 Phases to get my Target Model.
    - Phase 1 - Basic Model. Each BRG can be turned individually by Knob. ●
    - Phase 2 - #2 & 3 BRGs are geared to synchronize and can be turned by 2 Hands.
    - Phase 3 - All BRGs are connected with Gearbox and can be turned by Single Knob.
    - Phase 4 - Phase 4 + Additional GB. This is my Target Model to turn Single Lever.

    [Note] For Phase 2～4 Model, Proto type model was made, but I am still considering improvement to absorb the big movement of #2 & 3 BRG Gear Shaft Axis.
    These will be uploaded in near future.

    B. Assembly Manual (PDF format, total 13 pages)
    The detail assembly manual including "Parts-List", "After printing treatment" and "Assembly procedure" are prepared based on "Standard Skill (Filing, Drilling, Tapping and painting)".

    C. Download files includes;
    - files: STL Files (15 items)
    - “ws” of last 2 digits means “With Support” special designed.
    - PDF(Zip) File: Assembly Manual

    D. Purchase Parts Information; - See Assembly Manual
    - Aluminum Tubes - φ9
    - Screws
    Micro screws M1.4x6L - Direct screw-in to 1 mm dia hole (No nut)
    But there are many small parts, if you can get M1.4-P0.3 Tap, using it to make introducing thread is recommended.
    Quantity of screws can be adjusted by your experience.

    E. Total Net Print Time: Approx. 43 HR
    - (Estimated as case of PLA, 0.4mm Nozzle, 0.2mm Layer Height, 40% infill and No raft and support)
    Note: When at actual print, each parameter may be adjusted by your experience.
    For parts having gear teeth, 100% infill and 0.2mm Layer Height are recommended.

    Show more Zeige weniger
    Lizenz
    Printing Details

    See above.

    Technical Information
    Date published 26/01/2019
    Price $10.00
    More Information
    Object Parts
    Gear08 Pinion Hsg101.Stl 4 MB
    Gear08 Pinion Knob01.Stl 2 MB
    Gear08 Pinion01.Stl 229 KB
    Sn Ab In01.Stl 847 KB
    Sn Ab Out01.Stl 217 KB
    Sn Clamp Duct101Ws.stl 395 KB
    Sn Clamp Frt101Ws.stl 718 KB
    Sn Clamp Hldr102.Stl 2 MB
    Sn Clamp Rr101Ws.stl 573 KB
    Sn End Duct201Ws.stl 50 KB
    Sn Frame Duct201Ws.stl 206 KB
    Sn Frt Duct201Ws.stl 38 KB
    Sn Int Duct201Ws.stl 80 KB
    Sn Stand Base101.Stl 212 KB
    Sn Stand Flange101.Stl 139 KB
    Tags
    bearing aircraft fighter nozzle duct jetengine Swivel exhaust afterburner STOL
    Interesting objects for you
    Show more