Volvo remote control case
Volvo remote control case
3D
Published 2015-06-18T11:28:11+00:00
Printed with the free filament I've received from MMF (except the buttons).
This is a case for the remote control of my car (Volvo V70). The original was broken so I have designed a new one (although you can buy replacements for a few euro).
I have added 2 different top pieces. One is with my initials and one is without.
If someone wants there initials cut out please contact me if you have no success with it.
The prints will fit together without a lock mechanism. Will try to make a next model that will include this.
I have printed the buttons with support but it was hard to get it of. So print all without support.
This case is used with the following models:
Volvo C70 (-2005)
Volvo S70, V70XC (-2000)
Print at 0.2 mm layer height, with 10% infill. This uses 14 g of filament and takes 71 minutes.
| Date published | 18/06/2015 |
| Benoetigte Zeit | 71 - 81 Minuten |
| Menge an Filament | 14 g |
| Dimensionen | multiple parts |
| Schwierigkeitsgrad | Very Easy |
| Support Free | YES |
Printed me a new case with other colours.