22" PennyBoard Hanging Mount
4,647
visitas
172
descargas
1
colección
0 comentarios
Cargando comentarios...
22" PennyBoard Hanging Mount
3D
Published 2017-01-05T12:17:32+00:00
20
0
Add to Collection
Descripción
I couldn't find a good spot to store my board, so I decided to design and print some mounts I could attach to the side of my wardrobe and hang my board from. You can either use 2 or 4 to hang the board.
The horizontal distance between the mounts needs to be 65mm and if you are using 4 mounts the vertical distance is 365mm.
I printed this in white PrimaValue PLA on my Wanhao Duplicator i3 at a 0.2mm layer height with 25% infill which is more than strong enough to hold the weight.
Detalles de impresión
ok
Información técnica
Date published | 05/01/2017 |
¿Cuándo tiempo lleva? | 75 - 150 minutos |
Cantidad de filamento | 13 |
Dimensiones | 50×45×65 |
Tecnología | FDM |
Sin apoyo | YES |
Más información
Archivos