32 Ford Inspire Hotrod Cab - FDM Friendly
32 Ford Inspire Hotrod Cab - FDM Friendly
3D
Published 2017-05-21T14:07:38+00:00
This is a FDM-friendly version of my Hot Rod design (the original was designed for SLS printing).
If you appreciate the countless hours of work that a project like this takes then please consider leaving a tip so that I can buy more parts and design new builds.
I strongly recommend printing in ABS or PETG for strength (ABS does tend to warp on such large thin prints, but if you can get it to work then bonding the roof with acetone will result in a really strong body).
There is a significant chunk of support material needed under the hood in front of the windshield, everywhere else is support-free. I chose to do it this way to keep strength and reduce warping.
Follow my page on Facebook to keep up to date with new designs.
UPDATE: By request I have also uploaded the parts that I designed for laser cutting, they can be printed, but won't be very strong.
| Date published | 21/05/2017 |
| ¿Cuándo tiempo lleva? | - 1700 minutos |
| Cantidad de filamento | 300 |
| Dimensiones | 150x150x150 |
A slightly modified version of the 32 Ford Inspired Hotrod Cab to fit the Tamiya DT-03 buggy chassis. Printed in Woodfill PLA