3DPN spool holder
3DPN spool holder
3D
Published 2018-08-08T15:05:50+00:00
Hi,
this is spool holder that fits anywhere on the wooden bar of 3DPN shelves.
It is just one piece with 2 tilt stops (printed in place). No support, brim or raft is needed.
Features (also see the last picture):
1/ Provides 2 contact points for the spool to avoid its swing during print.
2/ Allows spool to tilt. The tilt can be kept by tilt stop (1st for wider spools and 2nd for narrower spools). I think it may be useful when the printer and its extruder is away from the wall.
3/ When not in use you can slide it on the 2nd slot to the vertical position and leave it aside.
4/ There are some inside perimeters in the part that help the strength to be more effective without changing external shape.
Note:
The tilt stops will probably be "welded" after being removed from the heatbed, but they can be separeted from the main part using screwdriver.
It is printed on PRUSA i3 MK2 with PLA, 0.2mm layer height, 3 perimeters, 20% cubic infill. No support, brim or raft needed.
| Date published | 08/08/2018 |
| ¿Cuándo tiempo lleva? | - 240 minutos |
| Cantidad de filamento | 45 g |
| Dimensiones | 27mm x 49mm x 155mm |
| Tecnología | FDM |
| Complejidad | Fácil |
| Sin apoyo | YES |
