AEPHAR06 - Phreebies
AEPHAR06 - Phreebies
3D
Published 2020-08-11T10:52:53+00:00
This set of 3D-printable terrain and miniatures, Pharaoh 6, was made by all of the Aether Studios artists together. Everyone contributed to this set, with Tia making the first textures, Jake making the animals, Colin with the Ram, Jeromy with scatter, Will and Nasos with the rest. Pharaoh has long been a collaborative experience and this set is the paragon of our progress so far. We hope you enjoy these models, along with the rest of the Pharaoh series.
TERRAIN Recommended Print Settings:
Layer Size:0.15mm recommended, 0.1mm for smoother features
Infill: 10% recommended for all models
Top/Bottom Layers: 6 (or 0.9mm if using a different layer size than 0.15mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
MINIATURE Recommended Print Settings:
Layer Size: 0.1mm recommended, 0.05mm for resin.
Infill: 25-35%% recommended.
Top/Bottom Layers: 8 (or 0.8mm if using a different layer size than 0.1mm)
Side Shell Count: 3 (or 1.2mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
| Date published | 11/08/2020 |
| Sin apoyo | YES |
solid piece of terrian..always great to throw this on the board and have them find a underground entrance to the dungeon and pharaoh tomb...plus its free