AEPWAR01 - War Trenches
$10.00 AEPWAR01 - War Trenches
3D
Published 2023-01-31T10:22:32+00:00
This set is included in our Welcome pack, for Tribers pledging $15 and up.
The War series of terrain was created by Colin Christenson. War Trenches is based on our 2nd published set, Peaceful Gardens, but diverges greatly from the unspoiled grounds. This set works and integrates completely with the entire Peaceful series of terrain, but this one is focused on the battlefields, of combat and tight trenches. This one is focused on War.
Colin Christenson deserves all the credit and praise for this set. He made the Peaceful terrain that it is based on, and did all of the work on this set. This set is a love letter to wargamers everywhere, and especially to our kin who gave us this overflowing love of miniatures and gaming terrain.
TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm minimum. 0.1mm recommended.
Infill: 10% for all models recommended
Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: Larger Terrain pieces can suffer with lightning infill.
MINIATURE RECOMMENDED PRINT SETTINGS
Layer Size: 0.1mm recommended, 0.05mm for resin.
Infill: 25-35% recommended.
Top/Bottom Layers: 8 (or 0.8mm if using a different layer size than 0.1mm)
Side Shell Count: 3 (or 1.2mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: None
| Date published | 31/01/2023 |
| Precio | $10.00 |
| Sin apoyo | YES |
Printed and painted by Windy Trusty