Bearing
5,884
visitas
328
descargas
1
colección
0 comentarios
Cargando comentarios...
Bearing
3D
Published 2016-08-22T08:52:16+00:00
18
0
Add to Collection
Descripción
This is a bearing. It was mainly designed for model cars. This model was created in PLA. It was printed using Cura 15.04 with a 0.2 layer height. The balls can be a little trikcy, but if you reduce the printing speed it should be no problem. You have to put the inner cylinder (innerb.stl) and the outer cylinder (outerb.stl) together and put the balls in, then stick the rings to the cylinders (innerl.stl ot innerb.stl and outerb.stl to outerl.stl). It was originally created for the ForceFiber competition.
Printed using Fiber Force filament.
Detalles de impresión
Printed at 60% scale. Recommended settings: Layer thickness: 0,09mm Infill: Maximum Support: 60 degree Fan speed: auto
Información técnica
Date published | 22/08/2016 |
¿Cuándo tiempo lleva? | 55 - 108 minutos |
Cantidad de filamento | 11 |
Dimensiones | Mounted: 37 x 37 x 9mm |
Tecnología | FDM |
Más información
Archivos