Bowie
Sin soporte
Destacado
8,450
visitas
422
descargas
6
colecciones
1 comentarios
Cargando comentarios...
Bowie
3D
Published 2014-11-20T21:28:31+00:00
94
1
Add to Collection
Descripción
Support free design competition
Organic geometry
For the organic geometry category: A honeycomb-inspired clip-on bow-tie! For instant snappy attire simply print, slip over the top button in your shirt and you're good to go! Recommended print settings: Print it slow (30-40mm/s) at 0.2mm layer height, with 15% infill. This uses about 3m of filament and takes 58minutes. Ideally print onto blue painters tape with a cooling fan.
Detalles de impresión
Recommended print settings: Print it slow (30-40mm/s) at 0.2mm layer height, with 15% infill. This uses about 10g of filament and takes 58minutes. Ideally print onto blue painters tape with a cooling fan.
Información técnica
Date published | 20/11/2014 |
¿Cuándo tiempo lleva? | 58 - 58 minutos |
Cantidad de filamento | 10 g |
Dimensiones | 88 x 8.5 x 46 mm |
Complejidad | Muy fácil |
Sin apoyo | YES |
Más información
Archivos
cool design love it