Brick Wall for 28mm Wargaming
Brick Wall for 28mm Wargaming
3D
Published 2017-11-21T10:13:31+00:00
A short (10 cm/ 4 inch) section of brick wall for 28mm wargaming. Designed with Warhammer 40,000 in mind, it will work just as well for any similar miniatures game as "partial cover". The wall comes just up to the waist of a standard infantryman, though prone units, such as those in Infinity and Bolt Action, could easily hide entirely behind it. The ends are flat enough that you should be able to link multiple prints together to form longer walls.
The wall has a small, non-descript base that could be painted to look like snow, sand, or dirt.
Designed in Fusion 360 and MeshMixer
Feedback is welcome!
The one pictured was printed on a Maker Select v2
Layer Height: .24mm
Speed: 60mm/s
Infill: 20%
| Date published | 21/11/2017 |
| ¿Cuándo tiempo lleva? | - 51 minutos |
| Dimensiones | 100mm x 20mm x 9mm (wall thickness) / 20mm (Base thickness) |
| Sin apoyo | YES |
