DIY Auto Plant Waterer
Destacado
29,480
visitas
1,316
descargas
26
colecciones
6 comentarios
Cargando comentarios... 
DIY Auto Plant Waterer
3D
Published 2014-12-06T09:57:09+00:00
450
6
Add to Collection
Descripción
The DIY Auto Plant Waterer that I first tested worked quite well (See:https://www.youmagine.com/designs/diy-auto-plant-waterer ).
I can get about 1 week+ of auto watering to my fairly large potted plant using a 1.89 L bottle (ocean spray juice bottle).
This is the revised design which I tested since the first one worked so well.
Additional materials needed:
- A long wick made from an absorbent material like cotton which, should be the length from the soil (I'd say about 4 cm or more deep into the soil if you want) through the tube of the plant waterer into the container holding the water (touching its base).
- A water container e.g. a 1.89 L ocean spray bottle (I used several types, hence I have several container connectors in the files) or similar with a neck (for attaching the auto plant waterer).
- and of course water!
Previous working test design: https://www.youmagine.com/designs/diy-auto-plant-waterer
Detalles de impresión
Print at 0.2 mm layer height, with 10% infill. This uses 57 g of filament and takes 337 minutes.
Información técnica
| Date published | 06/12/2014 |
| Dimensiones | multiple parts |
Más información
Archivos