Doll carriage
5,305
visitas
373
descargas
7
colecciones
1 comentarios
Cargando comentarios... 
Doll carriage
3D
Published 2017-04-19T11:22:02+00:00
83
1
Add to Collection
Descripción
This was designed to print with no support on a Printrbot Simple 2014. That means that it comes in at least four parts (one per corner) that have to be glued together. If you have a Barbie style doll, using the extension in between the two halves aids in the fit. Smaller sized dolls won't need the extension. Wheel shafts are close hanger wire. To prep, the hubs are pressed into the wheels, then the shafts are glued in place. I never printed the roof, but it's a reflection of the bottom parts without the chassis. I would advise against the roof unless you have smaller sized dolls.
Información técnica
| Date published | 19/04/2017 |
| ¿Cuándo tiempo lleva? | - 1200 minutos |
| Cantidad de filamento | 300 |
| Dimensiones | 100x150x100 multiple times |
| Tecnología | FDM |
| Sin apoyo | YES |
Más información
Archivos
