Fallout 4 Super Sledge
Fallout 4 Super Sledge
3D
Published 2016-05-03T14:30:21+00:00
Here I give you the SUPER SLEDGE FROM FALLOUT 4! Designed from reference pictures straight from the game, I made it to be as close to the original design as possible. This to full scale, so yes this will be a relatively lengthy build being that there are over 30 freaking pieces, but I challenge you guys to do it because who wouldn't like to own a super sledge, right? Assembly is going to be the tricky part for this project, so I included GIF files showing how it goes together. One thing to note is that the piece labeled "Super Sledge - Big Middle Rod (Trigger Holder)-1" should probably be printed with a high infill percentage as it gets rather thin and needs to be as strong as possible given that it is holding all that weight at the top.I can't wait to see if any of you attempt to make it, and if you have in questions or suggestions (like what to fix or what to make next), just leave one down in the comment section. Also, for the wire, you are pretty much going to have to install your own from the hardware store because there is no way in hell you are printing it x) Enjoy! Side note: if you don't want to use support material for the "top wire connector" piece, I split it up into two pieces to make it support free. Those files are labeled, "Top Wire Connector V2 - Top Wire Connector V2.1-1, and V2.2-1
Click here for the assembly GIF
Click here for the assembly GIF2
THIS MODEL IS UNDER MMF COPYRIGHT, SO PLEASE DO NOT SELL MY WORK ONTO ANY OTHER WEBSITES WITHOUT MY PERMISSION.
AlSO, PLEASE ATTRIBUTE ME WHEN POSTING PRINTS OF MY WORK.
THANKS.
| Date published | 03/05/2016 |