Gear puzzle
Gear puzzle
Published 2018-06-12T11:29:34+00:00
This puzzle is especially made for the Make Anything Puzzle Design Challenge.
As you can see on the pictures, this puzzle consists of a puzzle board and a lot of different gears. The objective of this puzzle is to connect the gears so they rotate. On the game card, you see two gears and the gears you can use.
First of al, you place the gears, you see on the game card. Then, you try to solve the puzzle (so all the gears rotate) by placing the gears you can use.
At last, you check with the given solution (more solutions are possible) if you did it correct, or you can cheat if you cannot solve the puzzle. The game cards have different difficulties, and with the hardest one's, the gears need to rotate in a specific orientation.
I made a few game cards which you can download. You can easilly make more and I would love to see which combination of gears you made!
Thanks for reading (and happy printing :D)!
My printing details:
- 0.2mm layer height
- Low speed for better quality for the letters
- PLA
- Hotend: 205, heatbed: 50
- Shell, bottom/top thickness: 0.8mm
- Flow: 100%
Date published | 12/06/2018 |
Cantidad de filamento | 50 gram |
Dimensiones | 80mm x 80mm x 20mm |
Tecnología | FDM |
Complejidad | Fácil |
Sin apoyo | YES |