Half an Pine cone (Photogrammetry)
4,428
visitas
158
descargas
1
colección
1 comentarios
Cargando comentarios...
Half an Pine cone (Photogrammetry)
3D
Published 2017-11-30T12:27:24+00:00
8
1
Add to Collection
Descripción
Scanned an pinecone I've picked up from a garden in France.
Sliced into half for easy printing on the base. Can be use to stick on walls for Decor if necessary. Creativity is up to you guys!
The model itself is rather small, size it up to 300-400% for a real-life size
This model has 100,000+ Mesh Faces, recommended to slow your printer speed to get the most detail out of it (perhaps 40mm-60mm/s for infills and perimeters)
Go high layer resolution on this one. 0.1mm Layer height will do the trick!
Detalles de impresión
Print with flat side down. Use support. NOTE: This object is very small and the print specs are for it scaled up 500%.
Información técnica
Date published | 30/11/2017 |
¿Cuándo tiempo lleva? | 177 - 177 minutos |
Cantidad de filamento | 27g |
Dimensiones | 70.0mm x 73.8mm x 43.8mm |
Tecnología | FDM |
Complejidad | Medio |
Más información
Archivos