Humanoid Robotic Hand
Humanoid Robotic Hand
3D
Published 2017-05-02T09:36:15+00:00
UPDATED 12/30/2018
The hand files are part of a larger project that's taken three years. You can find an extended version of this project including files for a full arm and more thorough parts list here: Humanoid Robotic Torso PROTO1
If you want more info on myself and my partner who helped make this, check out our website at AGBOTICS.tech
This project is an entirely 3D printed humanoid robot similar to the Inmoov project but with many major differences in design. It features an improved gripping design and an opposable thumb. This is created to be inexpensive, simple to make, and reliable. I've put the arm through some rigorous stress testing, and it's able to run for hours on end without a hitch. You can find the code I used in the project at his github here: CODE USED FOR THE ARM
Assembly of the arm is very simple and forthright, but I've posted a video of assembly with instructions (the order in which you assemble is crucial).Materials needed for the arm:
-Flexible Nylon Paracord
-Standard sized servos x5 (these are the servos I used but any standard sized servo will work well)
-Micro servo (like the standard servo- this is where I got the micro servo I used but there are many other models applicable)
-Fishing line between .5mm and .8mm (you can get this anywhere)
Tools needed for assembly:
-Super Glue
-Plyers
-Screwdriver
-Exacto Knife or Scissors
There are minimal constraints for printing. If you check out the full project which I linked in the description I have the settings I printed at listed, but these are only a suggestion.
| Date published | 02/05/2017 |
| Tecnología | FDM |
| Complejidad | Medio |